The PropGlide® PCK-625 Medium Kit is a foul-release coating system that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time.
Gain the advantages by applying PropGlide® to your vessel. The best prop speed alternative.
Increase in Prop Speed Means a Faster Vessel
PropGlide® dramatically reduces drag on the propeller and running gear caused by even the smallest fouling. Since growth is unable to attach to PropGlide® you will achieve higher RPM and vessel speed.
Improved Fuel Efficiency
Clean props and running gear provide more efficiencies to the engine and less fuel is burned and money saved!
Biocide-Free and Environmentally Friendly
PropGlide® is not a prop antifoulant, it is a foul release coating. It contains no harmful biocides, and performs because it is a super slick coating!
Ease of Application
PropGlide® is easy to apply for Do-It-Yourselfer’s and not just for the professional applicator.
The PropGlide® 625ML Medium Kit contains:
- 300ML Primer Base
- 75ML Primer Hardener
- 250ML Clear Topcoat
This 625ML Medium Kit will cover: 1 Propeller (24”- 36” with 4-5 blades) or 2 Propellers (13”- 24” with 3-4 blades)
PropGlide® Medium 625ML Kit contains 25% More Product Volume than Competitive Brands
PropGlide® Etching Primer Physical Properties
Mixing Ratio: Primer Base (Part 1) : Primer Hardener (Part 2) = 4 : 1 by volume
Color:
Primer Base (Part 1)Yellow
Primer Hardener (Part 2) : Clear
Dry Film Thickness: 8 microns
Drying Time: 5-15 minutes touch dry (temperature dependent)- 1 hour hard dry @ 20°C/68°F
Painting Interval: Apply PropGlide® Clear TopCoat when Etching Primer is just touch dry
Pot Life: 8 hrs @ 20°C/68°F
PropGlide® Clear Top Coat Physical Properties
Binder type: Silicone Polymer
Solvent: Xylene
Colour: Clear coating
Finish: Glossy
Dry time: 45 minutes touch dry ; 8 hours hard dry @ 20°C
Recommended film build: 75 microns per coat
Thinning: N/A
Clean up: Acetone
Shelf life: Unopened: 3 years+. Once opened: 12 Hours
5 Stars ***** – “Highly rated.product.” Scott H. Verified Reviews on 09-03-2021
5 Stars ***** –“Great tried something last year and came back to PropGlide this year” by Carl R. Verified Reviews on 03-23-2021
5 Stars ***** –“What do I think about Propglide? good value for size compared to competition. My props turned out to be 12″x24P so I had plenty of Propglide for all running gear not just props. Goes on easy enough. Use small foam roller or brush for primer (yellow) to minimize brush marks (brush ONLY for top coat). Now I know better for next time…and that will depend on how everything looks when we take her out next fall and how she runs during this ’22 season in RI.” by Ernie W. Verified Reviews on 04-12-2022
5 Stars ***** –“PropGlide is an excellent protective coating for my propellers” by Louis S. Verified Reviews on 12-22-2020
5 Stars ***** -“Easy to use. Too soon to comment on how it works. My boat is not yet in the water.” by Thomas G. Verified Reviews on 03-31-2020
5 Stars ***** –“Goes on as described, the prep is the hard part. We will see how it works when I drop it in the water in the new few weeks. Expect it to work as advertised. I ended up with the medium kit and it was way too much for me. 2 – 3 bladed props about 12 inch blades plus the shafts. Better to have too much than too little I guess but next time I will order the small instead of medium.” by Anonymous Verified Reviews on 03-09-2020
5 Stars ***** -“Have used it before and works great.” by Thomas S. Verified Reviews on 02-25-2019
